DB Heating & Cooling, Inc. Blog : Archive for the ‘Air Conditioning’ Category

Air Conditioning in Bergen County: Why Your Thermostat Matters

Monday, April 8th, 2013

While spring has only just begun, many homeowners are already thinking of the approaching heat this summer. Spring is the time of cleaning, organizing, and ensuring that your air conditioning system is ready to perform on even the hottest days of the summer. While we think about the compressor motor, the various coils, refrigerant, and ductwork, the thermostat is just as important as other aspects of the AC system. Without it, your AC cannot properly adjust to your desired temperature. For more information about the role your thermostat plays in cooling your home, call DB Heating & Cooling for air conditioning in Bergen County, NJ today.

The conventional non-digital thermostat uses a mercury switch to assess the temperature. Because mercury is a liquid metal, it conducts electricity and flows in a way not dissimilar to water. Inside this switch shaped like a vial are three different wires. The circular rotation of thermostat displaces the balance of the mercury switch, itself connected to a bimetallic strip that expands and contracts according to the temperature, which communicates to the heater or AC to turn on. Digital thermostats use something called a thermistor to sense the temperature and a microcontroller to convert that information into a LCD display. Programmable and wifi-enabled thermostats allow for greater customization.

Your thermostat controls your entire heating and cooling system. That’s a lot of responsibility for such a compact device. If there is something wrong with it, it can throw off the performance and efficiency of the heating and cooling systems. It’s imperative that your thermostat is properly calibrated so that it can accurately sense the temperature in the home and send that information to the heater or AC. Installing a programmable thermostat can dramatically increase the energy-efficiency of your home, without sacrificing any comfort.

Thermostats can have a significant impact on your cooling system. Make sure you’re ready for the summer heat with a programmable thermostat. For air conditioning service in Bergen County, NJ, call the experts at DB Heating & Cooling today! 

Continue Reading

Why You Need to Schedule Professional Commercial HVAC Repair in Bergen County

Monday, April 1st, 2013

Because many commercial HVAC problems are not immediately recognizable, they are often allowed to progress for some period of time. Due to the fact that problems with commercial HVAC equipment tend to get worse with the passage of time, this can be a real issue. Luckily, there are some warning signs that you can spot that may indicate a need for professional commercial HVAC repair in Bergen County. Do not wait for a total breakdown. Take these tips into consideration and call DB Heating & Cooling the moment you suspect a problem with your commercial air conditioning and heating equipment.

One telltale sign that it may be time to schedule professional air commercial HVAC maintenance is a decrease in the efficiency with which the equipment operates. Pay attention to the costs associated with running your commercial heating and air conditioning equipment. If it seems like there is a spike in the cost of operating this equipment then there is a good chance that there is an underlying problem causing this inefficiency. Not only does this mean your system is costing more to operate; it also means that your commercial air conditioning and heating system is at an increased risk of damage. Schedule service right away.

Even minor inconsistencies with the quality of your commercial HVAC system’s performance can be indicative of a more serious problem in development. If your system is heating and cooling your property unevenly, call a professional commercial HVAC technician right away. There may be a problem with your air ducts or the air conditioning and heating equipment itself causing this problem. No irregularity should be ignored, no matter how inconsequential you think it may be. The development of odd sounds or the presence of strange odors during operation may not seem like that big a deal. However, they may indicate a more serious issue that you are unaware of.

The sooner you can have any commercial HVAC repair in Bergen County completed, the better. Do not put the comfort in your commercial property at risk. Let DB Heating & Cooling help you keep your commercial property comfortable reliably all year long.

Continue Reading

Waldwick AC Repair Guide: Icing Problems on Air Conditioner Cooling Coils

Monday, August 20th, 2012

Air conditioning cooling coil icing problems can arise for a couple of reasons: either the air filter has not been properly replaced, or there is a condensing coil leak.  It is best to check and test the easiest problem first and then move on from there.

It is important to replace your Waldwick air conditioner’s filters as often as is recommended by the manufacturer.  A common result of not replacing filters frequently enough is a buildup of dust and dirt on the filter, which causes reduced air flow throughout the air conditioning unit.  With reduced air flow, the evaporator coil or cooling coil within the air handler can become blocked by ice or frost build-up.  Having cooling coil icing can significantly reduce or completely stop the amount of cool air being produced by an air conditioning unit.

Easy steps to diagnose and resolve air conditioning cooling coil icing problems:

  • Visually inspect the air conditioning cooling coils to check whether reduced air flow has been caused by cooling coil icing.  If ice or frost is found on the coils, thus blocking air-flow, proceed with the next step.
  • Turn off the air conditioning system completely to allow ice to evaporate, the unit will have to remain off until all ice is completely melted and drained away from the unit
  • Replace all dirty filters on the air conditioning unit
  • Once the a/c unit is de-iced and has fresh filters, it is safe to turn the system back on, to test whether the icy build-up happens again

If after completing these steps, when the air conditioning unit is turned back on cooling coil icing happens again, this could mean one of two things.  Either too little of the refrigerant is being released into the cooling coil due to a clogged capillary tube or a stuck thermostatic expansion valve.  Or the refrigerant charge is too low due to a refrigerant leak.  A refrigerant leak can happen at any point in the refrigerant piping system which would then need to be soldered and resealed, or it can happen in the cooling coil or condensing coil which could mean the entire coil needs to be replaced.  Fixing of refrigerant leaks should be handled by a Waldwick air conditioning professional.  Contact an experienced HVAC technician at DB Heating & Cooling that can identify the air conditioner cooling coil icing problem and execute the proper solution.

Continue Reading

Programmable Thermostats and Your Paramus AC

Monday, August 13th, 2012

Air conditioning makes our Paramus homes comfortable during a hot summer day. However, air conditioners need electricity to run, and most of us are trying to reduce our home’s energy consumption. There are a number of ways you can make your air conditioning system more efficient, including upgrading to an ENERGY STAR rated unit and scheduling regular maintenance, but one of the easiest steps to implement is installing a programmable thermostat.

Programmable thermostats automatically adjust the temperature in your home depending on the time of day. You can save up to 10 percent a year by turning down your thermostat back ten degrees for eight hours a day! Most models allow you to store multiple daily settings, so you can turn you air conditioner down during the day when you are at work and while you are sleeping, and still have the temperature cooler when you need it. You can also still manually adjust the temperature without affecting the normal settings, giving you complete control and helping you save energy.

Programmable thermostats are not all made the same, and there are many different makes and models. An Paramus HVAC contractor will go over the different features available to you so you can decide which best fits your needs. Different thermostats work better with different systems, for instance some heat pumps need thermostats that have multi-stage functions, so it is best to consult with a professional before deciding what to purchase.

Programmable thermostats allow you to save energy without sacrificing comfort, which is something that all of us are looking for. If you are looking for a simple, affordable way to improve your Paramus HVAC system, a programmable thermostat is a great choice. Most are easy to read and easy to use, call DB Heating & Cooling Inc today to learn more about having a programmable thermostat installed in your home!

Continue Reading

Teaneck AC Tip: Cooling Coil or Evaporator Coil Diagnosis & Repair for Air Conditioners

Monday, July 16th, 2012

Inside the air handler of your Teaneck air conditioning system is a cooling coil or evaporator coil. From a home cooling perspective, this is where the magic happens: where the actual cooling occurs. So, if there is a problem with the cooling or evaporator coil, you will notice a decrease in the performance of your AC system.

You may notice that the air flow has slowed significantly or even stopped, even though you can hear the air handler running. You may also notice that the air isn’t as cool as it used to be or should be. Aside from having a house that is not cool enough, this can also cause problems like high electricity bills or damage to other parts of the air conditioner. You technician will do the following to check your coil. Remember, all AC repairs are best performed by a licensed professional.

 Diagnosis

First, your tech will look at the cooling coil. Some problems are obvious enough upon visual inspection that no further diagnostics or major repair is necessary. To inspect the cooling coil on your air conditioner, they will first turn off the electricity at your fuse panel or breaker box. Then the  access panel on the air handler that can be removed to at least partially expose the coil.

They will look for things like:

  • Dirt and debris
  • Mold
  • Staining that indicates a refrigerant leak
  • Ice or frost
  • Damaged fins on the coil

 Repair

Any of these could be the culprit that is degrading the performance of your AC system. For most repairs you will want to call in a licensed technician. Especially if the problem is something potentially hazardous like mold growth or a refrigerant leak, you don’t want to take the risk. Let a Teaneck air conditioning professional like DB Heating & Cooling who is trained in safely and effectively repairing the problem take care of it, so that your home can be comfortable again.

Continue Reading

Waldwick Air Conditioning Tip: What is the COP and Why Is It Important?

Monday, July 2nd, 2012

If you’ve been researching air conditioners in Waldwick, you’ve probably seen all sorts of numbers associated with each model. One of these numbers is the Coefficient of Performance (COP). While it’s good to gather as much data as you can before you make a purchasing decision, you also need to know what that data means if it’s going to help you make the best selection possible.

Measuring COP

Calculating the COP for any air conditioning model is relatively simple. The number you see displayed on the box is the ratio of energy input to cooling output. For the most part, the air conditioners you’re probably been looking at have a COP of between 2.5 and 4.0, although newer models are beginning to appear with COPs of up to 5.0.

The higher the COP, of course, the more efficient the air conditioner, so it makes sense to take this number into account when you’re making your purchase. You should also keep in mind, though, that the COP is not a constant measurement. The warmer it is outside, the lower your unit’s COP will be. However, this is standard across all units, so a relative COP comparison is still a viable evaluation method.

If you’re not sure what COP you should look for or whether a lower number will be effective for your home (especially if you only need to cool a small space), you should talk to a Waldwick air conditioning professional who can help you match the right COP level to your particular living space.

Improving Efficiency

While it’s always a good idea to get an air conditioner with the best energy efficiency ratings possible, that’s not the only thing you can do to reduce your energy usage and keep your cooling costs down. For instance, there are plenty of ways to keep your home naturally cooler without even turning on the air conditioner.

Even when you do need to flip it on, anything else you can do to reduce the indoor temperature will make it easier for your Waldwick air conditioner to keep your house comfortable. So put up some awnings, run the ceiling fan and close the blinds to block out that harsh afternoon sun. The more you can do to reduce your indoor temperature naturally, the less your air conditioner will have to do, and the lower your cooling costs will be. For more information about how to improve your air conditioning system’s efficiency, give DB Heating & Cooling, Inc. a call!

Continue Reading

Things to Check on Your Broken AC Before Calling a Paramus AC Professional

Monday, June 18th, 2012

A broken air conditioner is a stressful situation, especially since you’re considering whether you need a Paramus AC professional to come out. No one likes spending money to have a professional take a look at their system, so before you call anyone, make sure to check these problems. You may be able to fix the problem on your own without spending a dime.

Thermostat

The thermostat is one of the most common problems you’ll have with an air conditioner.  Make sure the thermostat wasn’t knocked out of position and the sensors near your coils are in the right place. Often times, a bumped sensor or a slightly off thermostat can cause this kind of problem and as a result, you’ll be left without steady cooling.

Check Your Filters

Another common problem that can cause issues with your air conditioner is filter clogging. While the system will continue to run with a clogged filter, there are a few issues that might pop up – it could smell funny or you might notice icing on the outside line (a major problem). If you allow the filter to get so clogged as to block the air flow from your system, you can expect a number of problems to crop up.

Blower Belts

Check the system’s blower belt for damage like cracking, excess slack or general wear. A blower belt that isn’t properly installed or that needs to be replaced will reduce air flow which can result in ice buildup or poor air flow – it will make it harder for your system to maintain a steady temperature.

Check the Outdoor Unit

Check to make sure nothing is blocking the outdoor unit. Clean the condenser coils and remove any debris that might have built up around the outdoor unit. Often, slowed air flow is caused by nothing more than leaves piled in front of your condenser.

If none of these problems is the culprit or if you fix them all and your system continues to struggle, it is time to call a Paramus AC professional like DB Heating & Cooling!

Continue Reading

Teaneck AC Contractor Tip: Green Your HVAC

Monday, May 21st, 2012

Regular Maintenance Avoids High Costs

No matter the energy rating of the appliance, a schedule of simple maintenance and replacement of filters can make a significant difference in its longevity.  A furnace rated at 95% efficient will burn nowhere near that great a rating if the air is blocked and unable to pass through the filter without effort.

Fan belts on the blower motor can loosen over time and become ineffective, forcing the heater to burn longer and hotter to distribute air that should normally breeze through the ductwork.  Working so hard, parts break and the furnace might need replacement.

New Thermostats

If left to our own habits, our Teaneck air conditioners and furnaces might run for hours under unnecessary circumstances because we are not thinking to turn our thermostats up or down.  At the change of seasons, in particular, it may feel warm enough to open a window while the heat is still adjusted to come on at those fresher temperatures that now seem so inviting.

In older homes, the replacement of the old dial thermostats with the newer digital versions can save on energy costs.  Smart phones allow adjustments to thermostats from anywhere in the world for the instance that a cold snap may threaten frozen pipes while we are away on vacation.

Changing World

Tax incentives, climate change and the economics of energy dictate that we look closely at our habits and find ways to conserve our resources. For more information about how HVAC improvements can reduce your energy bills, give DB Heating & Cooling a call today!

Continue Reading

Teaneck AC Tip: Keep Your Home Cool and Save Energy

Monday, May 7th, 2012

As the season of hot days and long evenings draws near, it is normal for questions to arise on how to keep your home cool and save energy.  In normal trains of thought, using your Teaneck air conditioning unit frequently would mean higher utility bills.  However, there are some things which are easy to do and can help keep any house cool without overuse of an air conditioner.

Easy Fixes Which Cool the House from the Heat of the Sun

  • Provide effective shade for east and west facing windows, including planting shade trees around the exterior of the house
  • Delay heat-generating activities until evening
  • Keep the house closed tight during the day so that unwanted heat and humidity do not enter the home
  • Ventilate at night with open windows and fans
  • Use ceiling fans or room fans to increase comfort levels with higher air conditioning thermostat settings
  • Seal and insulate all air conditioning ducts, and seal leaky windows with caulk or weather stripping
  • Install window shades, blinds, awnings, sunscreens, or apply low-e films to windows to block most solar rays which cause heat gain
  • Close south and west-facing curtains during the day on windows which get direct sunlight, and invest in reflective solar curtains
  • Upgrade the insulation in the attic
  • Service the air conditioning unit annually, and place it in the shade with proper air flow to ensure it runs efficiently
  • Install a house fan to cool the entire home at once as well as cool the attic above

Eliminate Internal Heat Sources

  • Lessen stove and oven use during hot days and enjoy a backyard barbeque or cookout, keeping the heat out of the kitchen and in the great outdoors.  When cooking inside do so in the evening and employ use of the microwave, toaster-oven or counter-top grill which produces far less heat than the stove or oven.
  • Switch to newer, compact fluorescent lights which use less energy and produce far less heat than incandescent lights
  • Pass on the hot-drying cycle of the dishwasher and let dishes air dry, or dry them by hand
  • Line-dry clothes rather than using the dryer, or use the lowest heat setting on the dryer
  • Take shorter showers that are cooler, and turn on exhaust fans and open windows to properly ventilate the area, allowing excess heat to escape
  • Turn computers and other electronics off when not in use, and use electronic devices such as TV’s less often throughout the day

Combining the various home fixes while eliminating internal heat sources can turn out to be the best ways to keep your home cool and save energy during hot summer months.  Just try some and see how that energy bill decreases! For more information about how to best utilize your Teaneck air conditioner, give DB Heating & Cooling, Inc. a call!

Continue Reading

Waldwick AC Tip: Outdoor Air Conditioning Components

Monday, April 23rd, 2012

As long as all the parts are working well, your Waldwick air conditioning system is a modern convenience you can easily take for granted and overlook. Cool air makes our lives simply better, but is a complicated process based on an old theory and modern technology.

No matter the size, in every unit, the basic purpose is one of extracting heat from the conditioned space and moving it to the outside, leaving cool air in its place. This process easily divides into indoor and outdoor components.

Air Conditioning 101

Utilizing the basic principal of thermal energy that heat gravitates toward cooler temperatures, compounds known as refrigerants travel through a closed looped system, repeatedly transforming between liquid and gas forms. Chosen for their ability to rapidly change at low temperatures, they alternately absorb and release heat along the way.

Having expanded to a vacuous state with plenty of room between molecules to absorb heat, the refrigerant is compressed tightly, condenses back into liquid form and releases the heat to the outdoors.

In the Box Outside

Placed on a small slab on the ground alongside many homes or on the roof of large buildings, air conditioning units contain the compressor and condensing coils that enable the main (and noisiest) function of the process.

The refrigerant is contained within a closed loop, entering the compressor as an expanded gas full of heat.  Under pressure, that heat is released when the molecules are squeezed so tightly together the refrigerant returns to its liquid state.

The Passing into the condensing coils, a series of delicate fins, the released heat is allowed to dissipate through the fins into the air where a small fan blows it away.  Water is also a by-product of the condensation and drains into a pan and eventually into the ground.

The condensing coil ends at the exchange valve where it is held to create just the right pressure for the evaporating coil indoors to operate at its maximum efficiency.

Refreshing Maintenance

When maintained on a regular basis, your Waldwick air conditioning system requires little attention and over sight beyond scheduled appointments with a company like DB Heating & Cooling, Inc.

Continue Reading