Heating – Preventative Maintenance

Controls

• Aquastat (double and triple)
• Circulator relay
• Electronic ignition control
• Emergency switch
• Fuses
• High limit control
• Limit control
• Low limit control
• Thermostat (standard)

Boiler Systems

• Circulator coupling
• Circulator impeller
• Circulator motor
• Circulator relay
• Circulator wicking
• Draft inducer
• Dual control valve
• Feed valve
• Flame sensor
• Gas cock valve
• Ignition cable
• Pressure reducing valve
• Relief valve
• Temperature gauge
• Thermocouple

Furnace Systems

• Blower bearings
• Blower belt
• Blower motor
• Blower motor pulley
• Blower wheel
• Condensate line
• Draft inducer
• Fan control
• Gas cock valve

Burner Parts

• Flame sensor
• Gas valve
• Hot surface ignitor
• Low voltage transformer
• Pressure switch
• Spark plug
• Sensor
• Sensor ignition module
• Thermocouple

Heating Tune–Up:

• Lubricate blower and motor bearings (if equipped).
• Check belt condition and tension (if equipped).
• Install clean air filters (1″ disposable fiberglass filters provided).
• Check that furnace flue is venting properly.
• Adjust burner for proper flame (as necessary).
• Check condition of pilot; clean (as necessary).
• Check gas line pressure.
• Check manifold pressure.
• Check condensate if necessary.
• Check fan and limit control.
• Check pilot safety.
• Check heat anticipator.
• Check pressure regulator.
• Check burner operation.
• Check heat relay.
• Check safety controls.
• Check thermocouple.
• Check temperature rise.
• Check fan speed for winter operation.

The Premier Comfort Agreement includes the following guarantee:

• Expert Heating Tune–Ups – When we tune up your system, we ensure efficiency and performance by checking the complete operation of your system.
• 24–hour Emergency Service – We’re here for you 24 hours a day, 365 days a year. Plus, only service plan clients receive after–hours service during peak periods.
• Priority Scheduling – Calls from service plan clients move to the top of our list. In addition, we reserve the first and last appointments of the day for service plan clients.
• No Subcontractors – We use only our own certified technicians, who receive ongoing training and have all the resources they need to solve the most complicated problems.
• Respect for your home or office – We always clean our work area when we finish a job. To protect your home or office, we lay down drop cloths and wear protective footwear.
• 100% Satisfaction – If you are not satisfied with a repair, we will return to fix it – and we won’t leave until you’re satisfied.

Click Here to View Contract