DB Heating & Cooling, Inc. Blog : Posts Tagged ‘New Jersey’

Is Your Hackensack Heat Pump Malfunctioning?

Monday, March 26th, 2012

In a perfect world, you would never have to worry about things like malfunctions or repairs. Everything would just work without ever needing to be maintained or fixed, and you could spend your time and energy on more enjoyable pursuits.

Unfortunately, no such perfect world exists. Things wear out and break down, often at the least opportune time. And of course, your Hackensack heat pump is not immune. Despite being a great all around machine, a heat pump can malfunction, just like anything else.

But how can you know whether your heat pump is not working right? Here are some signs and symptoms that are often indicative of common Hackensack heat pump problems:

  1. Too Much Noise – Whether emanating from your car or your usually quiet heat pump, noises are often the first sign that something is amiss. You should expect your heat pump to make some noise; the compressor and air handler are two culprits. However, if it starts making more noise than it did before, something may be up. Sometimes this is as simple as some loose fittings, but it’s still something that should be checked out.
  2. The House Is Too Cold – Obviously, if you get a heat pump to heat your house, you expect it to do just that. So, if your home is too chilly, you know something is amiss. If it’s way too cold, the heat pump may not be running at all, which can be the result of a serious malfunction. If it is only a few degrees below where you set it, it may be a different problem. It could be that something is malfunctioning in the heat pump, but it could also be that the outside air is too cold for the heat pump to keep the house warm. In that case, the best solution is supplemental heating.
  3. The Heat Pump Turns Off Too Soon – If your heat pump seems to be shutting off too quickly, it may be short cycling. That means that it is turning off before getting through its entire heating or cooling cycle. Frequently this is simply caused by dirt or debris around the outdoor coil, in the air handler or in the filter. Check these areas out and clean them. In general, you will want to keep the various components of your heat pump clean in order to ensure the best performance.

These are just some of the main symptoms of common problems. Other things can go wrong with your heat pump, although it is not very likely. As a general rule, if you notice your heat pump performing strangely or doing something it hasn’t done before, it’s best to get it checked out by a New Jersey heating and air conditioning contractor.

If you are in need of heat pump repair in the Bergen County area, give DB Heating & Cooling a call!

 

Continue Reading

Tags: , , ,
Posted in Heat Pumps | Comments Off on Is Your Hackensack Heat Pump Malfunctioning?

Question from Hackensack: How Do I Check a Gas Furnace Draft Pressure Switch?

Wednesday, December 28th, 2011

There are many reasons why a furnace stops working and in many cases, a Hackensack homeowner can perform some simple diagnostics to pinpoint the problem. Finding the problem is one thing – fixing it is another. When in doubt, don’t try it yourself. Call a qualified Hackensack professional.

But let’s look at one possible problem and solution you may be able to perform yourself – testing the draft pressure switch. The draft pressure switch on a gas furnace allows an electrical current to pass through to ignite the furnace. The pressure switch monitors the draft conditions and won’t allow the furnace’s gas valve to open unless draft is correct.

If the switch is malfunctioning, so too will (or will not) the furnace.

The best way to locate the switch is by consulting with your owner’s manual or by going online and simply typing in the words “gas furnace draft switch.” It is identifiable by its round size and is bolted to the outside of the furnace. It should be nearby the draft inducer motor because the two are connected by a metal tube. The tube may sometimes be the culprit, too. A tube that is blocked with condensation may cause the switch to go bad.

To check for proper function, first turn off power to the furnace, either by shutting down the ‘on’ switch at the furnace or shutting off the circuit breaker.

Use a volt ohm meter to check if the switch is opening and closing properly. Start by zeroing out the meter’s probes by touching the tips together. Using the dial (could be analog or digital), set the meter to 24 volts. Ground the black probe by attaching it to any metal part of the furnace. Then place the end of the red probe on the metal tube connecting the draft pressure switch to the draft inducer motor.

If the switch is working properly the meter should read at least 24 volts, or very near that. If the reading is short of 24 volts, the switch is not working correctly. At that point you may decide to replace it or call a Hackensack professional to do the task (recommended).

Continue Reading

Tags: , , ,
Posted in Heating | Comments Off on Question from Hackensack: How Do I Check a Gas Furnace Draft Pressure Switch?

Most Commonly Asked Questions About Heat Pumps: A Guide from Teaneck

Wednesday, October 19th, 2011

If you’re thinking about buying a new heat pump for your Teaneck home, chances are you have some questions about these types of products and how they work. In fact, because these types of home comfort systems are relatively new to a lot of people, there are a quite a few misconceptions out there about how effective and efficient they can be.

Recently we’ve gotten some good questions from our readers, so we thought we’d like to pass along the answers so that others can benefit from the information as well.

If I Buy a Heat Pump, Do I Have to Buy an Air Conditioner Too?

That heat pumps are only able to heat your home is probably one of the biggest misconceptions about this type of equipment. Heat pumps work by extracting heat from the air in one place and transferring it to another. That means that in the winter, your heat pump is able to heat your home by taking heat from the outdoor air and moving it inside.

However, in the summer, the heat pump is able to do the same thing only in reverse. When you switch on your heat pump’s cooling function, it will be able to take the heat out of your indoor air and transfer it outside. In this way, the same heat pump system can keep your home warm in the winter and cool in the summer without you needing to purchase an air conditioner or other supplemental comfort systems.

If I Choose a Heat Pump System, Will I Also Need to Install Supplemental Heat?

That depends on what the climate is like where you live and how warm you like to keep your home. In general, heat pumps can keep any home comfortable as long as the outdoor temperature is above 32°F or so. If the temperature outside drops below that, you may want to have some type of supplemental heating system just in case. However, a heat pump will still be able to provide some warmth at these lower temperatures and you may be able to keep yourself comfortable with a simple space heater or two.

Continue Reading

Tags: , ,
Posted in Heat Pumps | Comments Off on Most Commonly Asked Questions About Heat Pumps: A Guide from Teaneck

How to Use AC Most Efficiently in New Jersey

Wednesday, September 7th, 2011

Air conditioning is definitely something most of us wouldn’t want to try and get through the New Jersey summer without. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of astronomical cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative?Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.
  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a major expense that most of us are resigned to paying, but there’s no reason to pay more than necessary with so many strategies available to save money.

Continue Reading

Tags: , , ,
Posted in Air Conditioning | Comments Off on How to Use AC Most Efficiently in New Jersey